Connect to TTUnet using WPA2 in Windows Vista
STEP 1: Click Start -> Network.
STEP 2: Click Network and Sharing Center at the top of the window.
STEP 3: Click Manage wireless networks.
STEP 4: If TTUnet is already listed, select it and click Remove. Then click Add.
STEP 5: Click Manually create a network profile.
STEP 6: Enter the following, then click Next.
- Network name: TTUnet
- Security type: WPA2-Enterprise
- Encryption type: AES
- Check Start this connection automatically
STEP 7: After TTUnet is added, Click Change connection settings.
STEP 8: In the Connection tab, enter the following:
- Check Connect automatically when this network is in range
- Uncheck Connect to a more preferred network if available
STEP 9: Click the Security tab. Then verify these settings:
- Security type: WPA2-Enterprise
- Encryption type: AES
- Network authentication method: Protected EAP (PEAP)
- Check Cache user information for subsequent connections to this network
- Click Settings.
STEP 10: Verify these settings:
- Check Validate server certificate.
- Select Authentication Method: Secured password (EAP-MSCHAP v2).
- Uncheck Enable Fast Reconnect.
- Click Configure.
STEP 11: Uncheck Automatically use my Windows logon name and password (and domain if any) and click OK on all windows.
STEP 12: Wait until the notification that says Additional information is required to connect to TTUnet. Click to provide additional information and connect appears and click on it.
STEP 13: When the Enter Credentials window appears, enter the following and click OK.
- User name: Your eRaider Username
- Password: Your eRaider Password
- Logon domain: TTU
