Texas Tech University - Contact and Surface Engineering Laboratory

Publications Lists:

    1.  J. Park, Y.-K. Hong, C.-D. Yeo, S.-G. Kim, D. S. Kuo, L. Gao and J.-U. Thiele, “Electronic Structure and Magnetic Properties of Mn Substituted Fe-Pt,” IEEE Transaction of Magnetics, accepted (2015). .

    2.  J. Song, S. Lee, J. Lee, and C.-D. Yeo, “Atomic Degradation and Wear of Thin Carbon Films under High Speed Sliding Contact using Molecular Dynamics Simulation,” Tribology Letters, accepted DOI: 10.1007/s11249-015-0577-3, (2015) .

    3.  C.-D. Yeo, A. Palazotto, J. Song and R. Buentello, “The Evaluation of Thermomechanical Damage of a Slipper and Rail in a Rocket Sled System,” ASTM Journal of Testing and Evaluation 44(4), (2016) DOI: 10.1520/JTE20140367 (published online 2015) .

    4.  J. Lee, J. Maharjan, M. He, and C.-D. Yeo, “Effects of In-Situ Sliding Contact on Dynamic Adhesion Measurement in Colloidal Probe Technique,” International Journal of Adhesion and Adhesives 60, 109 – 116 (2015) .

    5.  M. He, S. Lee, and C.-D. Yeo, “Investigating Atomic Structure of Thin Carbon Film under Mechanical Stress and Frictional Heat Generation,” Surface and Coatings Technology 261, 79-85 (2015) .

    6.  S. Lee, M. He, and C.-D. Yeo, “Thermal Degradation and Burnishing Wear of Thin Carbon Film by Frictional Heat Generation,” ASME Trans. Journal of Tribology 136(4), 041603 (2014) DOI: 10.1115/1.4027749.

    7.  S. Lee, D. Purani, A. Kim, and C.-D. Yeo, “Thermomechanical Contact between Magnetic Recording Head and Disk Defect accounting for Heat Partition Factor,” IEEE Trans. Magn. 50(3), 3300307 (2014).

    8.  S. Lee, M. He, G. Abo, Y. Hong, and C.-D. Yeo, “The Effects of Contact Stress on Magnetic Properties of Ferromagnetic Film,” Journal of Applied Physics 112, 084901 (2012).

          Ø  Featured in Tribology & Lubrication Technology (TLT) Magazine June 2013


    9. C.-D. Yeo, J.K. Lee, and A.A. Polycarpou, “Dynamic adhesive forces in rough contacting bodies including normal and sliding conditions,” Journal of Adhesion Science and Technology 26, 2709-2718 (2012).

    10.  S.A. Lee, S. Niazie, and C.-D. Yeo, “The Change in Surface Properties of Magnetic Recording Media under Pulsed Laser Application,” Tribology Letters 47, 57-65 (2012).

    11.  S.A. Lee and C.-D. Yeo, “Microwear Mechanism of Head Carbon Film during Head Disk Interface Sliding Contact,” Tribology International 45, 30-37 (2012).

    12.   I.-H. Sung, H. J. Kim, and C.-D. Yeo, “First Observation on the Feasibility of Scratch Formation by Pad-Particle Mixture in CMP Process,” Applied Surface Science 258, 8298–8306 (2012).

          Ø  Featured in the ADINA News (Tech Review)


    13.   I.-H. Sung, W.Y. Yang, H. Kwark and C.-D. Yeo, “Fluid-Structure Interaction Modeling and Simulation of CMP Process for Semiconductor Manufacturing”, Transactions of the Society of Information Storage Systems 7(2), 60-64 (2011).

    14.  C.-D. Yeo, R.R. Katta, J.K. Lee and A. A. Polycarpou, “Effect of asperity interactions on rough surface elastic contact behavior: Hard film on soft substrate,” Tribology International, Vol. 43, pp. 1438-1448 (2010).

    15.  C.-D. Yeo, R.R. Katta and A.A. Polycarpou, “Improved Elastic Contact Model Accounting for Asperity and Bulk Substrate Deformation,” Tribology Letters 35, 91-203 (2009).

    16.  C.-D. Yeo, S. –C. Lee, and A.A. Polycarpou, “Dynamic adhesive force measurements under vertical and horizontal motions of interacting rough surfaces”, Review of Scientific Instruments 79, 015111 (2008).

    17C.-D. Yeo, A.A. Polycarpou, S.C. Lee and M. Sullivan, “Friction Force Measurements and Modeling in Hard Disk Drives,” IEEE Trans. Mag. 44, 157-162 (2008).

    18.  C.-D. Yeo, A.A. Polycarpou, J.D. Kiely and Y.-T. Hsia, “Nanomechanical Properties of Ultra-thin Carbon Film Overcoats Using the Nanoindentation Technique”, Journal of Materials Research 22, 141-151 (2007).

    19.  C.-D. Yeo, A.A. Polycarpou, “A Correction to the Nanoindentation Technique for Ultra-shallow Indentation Depths”, Journal of Materials Research 22, 2359-2362 (2007).

    20.  K.M. Lee, C.-D Yeo and A.A. Polycarpou, “Relationship between scratch hardness and yield strength of elastic perfectly plastic materials using finite element analysis,” Journal of Materials Research 23, 2229-2237 (2008).

    21.  E. E. Nunes, C.-D. Yeo, R. Katta and A. A. Polycarpou, “Computational Analysis of the Effects of Planarization in Pattern Media,” IEEE Trans. Mag. 44, 3667-3670 (2008).

    22.  K.M. Lee, C.-D. Yeo and A.A. Polycarpou, “Nanomechanical Property and Nanowear Measurements for Sub-10 nm Thick Films in Magnetic Storage,” Experimental Mechanics 47, 107-121 (2007).

    23.  K.M. Lee, C.-D. Yeo and A.A. Polycarpou, “Mechanical Property Measurements of Thin Film Carbon Overcoat on Recording Media towards 1 Tb/in2,” Journal of Applied Physics 99, 08G906 (2006).

Copyright © 2014 Contact and Surface Engieering Laboratory All Rights Reserved.