GEBs Training Program Curriculum
Expected Learning Outcomes of Program
Module 1: Energy Audit and Instrumentation
- Describe the types of energy audits and when each is used.
- Analyze building energy consumption.
- Use instrumentation and measurement tools for energy audits.
- Identify energy-saving opportunities.
- Case study: conduct a mini energy audit of a lab, classroom, or mock facility.
Module 2: Energy Accounting and Economics
- Interpret utility rate structures and demand charges.
- Perform life-cycle cost analysis (LCCA).
- Calculate simple and discounted payback.
- Calculate net present value (NPV) and internal rate of return (IRR).
- Evaluate the cost-benefit of demand flexibility.
- Case study: estimate the ROI of battery storage or demand response participation.
Module 3: Electrical Fundamentals and Lighting Analysis
- Explain the fundamentals of building energy auditing.
- Understand electrical fundamentals and power systems in buildings.
- Measure electrical energy and assess power quality.
- Apply light and photometric principles.
- Compare lighting technologies and their energy performance.
- Use electrical and lighting audit methods to find efficiency opportunities.
Module 4: HVAC Systems
- Identify HVAC system types, including central and distributed systems, packaged rooftop units, chillers, and heat pumps.
- Analyze HVAC load profiles, seasonal trends, occupancy, and thermal loads.
- Describe smart HVAC technologies such as VFDs, smart thermostats, and sensors.
- Explain HVAC control and its role in grid-interactive operations.
- Hands-on: simulate HVAC control scenarios on the testbed or the SEL platform.
Module 5: Indoor Air Quality (IAQ)
- Explain the fundamentals of indoor air quality in buildings.
- Identify sources and types of indoor air pollutants.
- Apply ventilation principles and air distribution concepts.
- Measure and monitor indoor air quality parameters.
- Assess the impact of HVAC systems on indoor air quality.
- Apply IAQ standards (ASHRAE and World Health Organization guidelines) and improvement strategies.
Module 6: Building Envelope
- Evaluate thermal insulation design, materials, and performance.
- Compare window design and technology options.
- Identify air infiltration and sealing measures.
- Recognize and address thermal bridging.
- Explain how the envelope reduces heating and cooling loads.
Module 7: Energy Management Strategies
- Apply energy management basics: benchmarking, KPIs, and the plan-do-check-act cycle.
- Plan peak demand management, load shifting, load shedding, and storage integration.
- Apply measurement and verification using IPMVP, and compare simple payback with life-cycle cost.
- Use operational approaches such as operator engagement, occupant behavior, and scheduling.
- Hands-on: perform an energy audit and build an energy management plan.
Module 8: Test Bed Visit
- Tour the TTU energy audit test beds.
- Identify energy audit sensors and measurement devices.
- Plan sensor placement and data acquisition in buildings.
- Monitor electrical, thermal, and environmental parameters.
- Manage, analyze, and visualize energy audit data.
Renewable Energy
-
Address
1009 Canton Ave., MS 3155 Lubbock, TX 79409-3155 -
Phone
806.742.6284 -
Email
renewableenergy@ttu.edu